pelatihan hvac



HVAC OPERATION AND MAINTENANCE – Heating, Ventilation and Air-Conditioning System: Operation and Maintenance, covers the fundamentals and practical applications for understanding air-conditioning systems including the operation and maintenance. The comprehensive coverage of the basic theory, latest terminology, system analysis, optimization concept, and calculation methods to make this the most complete course available today in achieving an economical system. Fundamentals of air-conditioning system give comprehensively understanding air treatment and heat transfer principle in reducing energy cost, besides essential knowledge of fluid mechanics in air conditioning system. Those all play important role on operation and maintenance of air conditioning systems. Participating in this course, you enable to analyze and recommend the most effective solution available in air conditioning system for operation and maintenance, enable to utilize energy as possible as saving due to limited energy resources, and also you are familiar and better understanding of all aspects relate to efficient air-conditioning system in building.


  1. Basic Theory of HVAC
    Basic Concept of HVAC
    Basics of Heat and Measurement
    Thermodynamic Properties and Process
    Psychometrics and Air Treatment
    Global Issues in Environment
    Unit and Conversion
  2. Refrigeration and Refrigerants
    Montreal and Kyoto Protocol
    Refrigerant Types and Naming Rule for Refrigerants
    Refrigerant Requirements and Desirable Qualities
    Refrigerant Selection
    Suitable of Oil and Refrigerant
    Vapor Compression and Vapor Absorption Cycles
    Evaporative Cooling and Cooling Tower
    Storage System
    Water Systems and Unitary Systems
  3. Air Distribution System
    Unitary and Central System
    Single-Zone Systems
    Multiple-Zone Systems
    Terminal Reheat Systems
    Dual-Duct or Multi-zone System
    Pressure Drop in Duct
    System Balancing
    Centrifugal Fans and Their Characteristics
    Air Distribution in Rooms
    Diffusers and Induction
  4. Hydronic System
    Water and Refrigerant Piping
    Comparison of Water and Air as Heat-Conveying Media
    Heat Distribution from Hot-Water System
    High-Temperature Water Systems
    Available Pipe and Tubing
    Pressure Drop in Water Piping Installation
    Pressure Drop in Refrigerant Piping Installation
    Pump Characteristic and Selection
  5. Basic Automatic Controls
    Basic Electricity and Magnistism
    Introduction to Automatic Controls
    Automatic Control Components and Applications
    Troubleshooting Basic Control
  6. Safety, Tools, and Equipment
    General Safety Practices
    Tools and Equipment
    Tubing and Piping
    Calibration Instrument
    General Maintenance
  7. Leak Detection, Pumping Down and Charging
    Dye Systems
    Test Pressures
    Methods of Testing
    Bubble Test
    Halide Torch
    Electronic Leak Detector
    System Evacuation
    Refrigerant Recharging
    Refrigerant Recovery
    Recycling and Reclaiming
  8. Operating Principles and Symptoms
    Temperature, Humidity and Air Motion
    Air Measurement
    Calculating the Operating Head Pressure
    Compressor Pressure Ratio
    Air Handling Unit
    Fan Coil Unit
    Filter Check
    Troubleshooting and Symptoms of System Faults
    Troubleshooting Refrigeration Systems
    Troubleshooting Hydronic Systems
    Troubleshooting Air Distribution Systems
  9. Service Diagnosis and Repair
    Definition of Reparation
    Replacing a Thermostatic Expansion Valve
    Replacing the Filter Drier
    Compressor Efficiency Test
    Water Cooled Condensers: Scale and Corrosion
    Compressor Motor Burn-out: System Flushing
    Pressure Controls
    Special Duct Problems and Duct Maintenance
    Special Piping Problems and Hydronic Maintenance.

1. Technicians
2. Mechanical and facility engineers
3. Who responsible for operating and maintaining mechanical equipments for building

Agenda PelatihanLokasi & Investasi
- 2 sd 4 Januari 2021
- 13 sd 15 Februari 2021
- 27 sd 29 Maret 2021
- 17 sd 19 April 2021
- 7 sd 9 Mei 2021
- 12 sd 14 Juni 2021
- 17 sd 19 Juli 2021
- 14 sd 16 Agustus 2021
- 12 sd 14 September 2021
- 16 sd 18 Oktober 2021
- 21 sd 23 November 2021
- 26 sd 28 Desember 2021
- Yogyakarta(6.500.000 IDR / participant)
- Jakarta(6.500.000 IDR / participant)
- Bandung (6.500.000 IDR / participant)
- Bali (7.500.000 IDR / participant)
- Surabaya (6.000.000 IDR / participant)
- Malang (7.000.000 IDR / participant)
- Batam (7.500.000 IDR / participant)
- Lombok(7.500.000 IDR / participant)

Metode PelatihanFasilitas
- Presentasi
- Diskusi
- Case Study
- Simulation
- Evaluation (Pre and Post Test)
- Kunjungan/Praktek (Menyesuaikan/tentative)
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE TransporsiPeserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Catatan :

Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Tlp./ WA: 0813-9174-4490 || Email:

Tinggalkan Komentar

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *